Hobart Ecomax Plus H615-D-VE Pass Through Dishwasher with Vapostop
$12,441.00
Finance Options


Product Information
Description
The Hobart Ecomax Plus H615-D-VE is Hobart’s H615 hood-type dishwasher fitted with VAPOSTOP-ER, an exhaust air heat recovery system that keeps the steam inside the machine when the hood is lifted. It suits restaurants, cafés, pubs and hotel kitchens that want a pass-through dishwasher without a cloud of vapour over the wash-up bench.
Hobart says VAPOSTOP-ER reduces overall energy consumption and, in most installations, removes the need for a separate exhaust canopy over the machine. Check your council and mechanical services requirements before ruling a canopy out. The trade-off is time: VAPOSTOP-ER adds 45 seconds to each cycle, so allow for it when sizing the machine for peak service.
Apart from VAPOSTOP-ER it matches the standard H615 specification: single-button control with status indication, 60, 90 and 180 second cycles, Hobart’s machine hygiene cycle, electronic temperature gauges and a 440 mm loading height that takes plates, glasses and 1/1 GN pans in the optional T-06-09 tray rack. A rinse pump keeps the 2.2 litre final rinse at full volume and pressure, and the deep-drawn tank has coved corners with no welds and a self-cleaning cycle on drain-out.
It runs on 415V three-phase power (7.2 kW total loading) and comes ready to connect, with detergent and rinse aid dispensers, fill hose, power lead and pump-out drain and hose included, plus a plate rack and cutlery holder. It is WaterMark approved and made in Germany. Where water hardness is above 3°dH, Hobart recommends a water softener or a HYDROLINE water treatment system.
If your wash-up area already has a canopy, the standard Hobart Ecomax Plus H615-D is the lower-cost option. Commercial Kitchen Company supplies the wider Hobart range and other pass-through dishwashers, and our team at the Brisbane and Gold Coast showrooms can help you compare models.
Dishwasher only, excludes benches and extras.
Specifications
| Specification | Detail |
|---|---|
| Performance | |
| Cycle times | 60, 90 and 180 seconds (VAPOSTOP-ER adds 45 seconds) |
| Rinse water | 2.2 litres per cycle, with rinse pump |
| Tank capacity | 21 litres |
| Loading height | 440 mm |
| Bench to bench (internal) | 628 mm |
| Temperatures | |
| Wash tank | 55–65°C |
| Final rinse (booster) | 82°C minimum |
| Thermostop low-temperature cut-out | Yes |
| Power | |
| Electrical | 415V, 50Hz, three phase |
| Booster | 6.2 kW |
| Tank heating | 2.5 kW |
| Wash pump | 0.7 kW |
| Total loading | 7.2 kW |
| Connections | |
| Drain hose | 2,000 mm, ID 20 / OD 25 mm, pump-out drain |
| Water supply hose | 2,000 mm, R 3/4″ |
| Supply flow rate | 5 litres per minute |
| Flow pressure | 0.5–6 bar (0.8 bar minimum with a softener) |
| Maximum supply water temperature | 60°C (35°C with RO) |
| Power cord | 2,500 mm |
| Detergent and rinse aid hoses | 2,000 mm |
| Dimensions | |
| Footprint | 635 × 635 mm (713 mm across the hood handles) |
| Height | 1510 mm hood closed, 1995 mm hood open |
| Bench height | 860 mm |
| Adjustable feet | Heights vary by 25 mm |
| Construction | |
| Hood | Fully enclosed, four-sided |
| Tank | Deep-drawn with coved corners (no welds), self-cleaning cycle on drain-out |
| Wash and rinse arms | Polypropylene wash arm, stainless steel rinse arm, wide-angle fan nozzles |
| Included | Plate rack, cutlery holder, detergent and rinse aid dispensers, fill hose, power lead, pump-out drain and hose |
| Water hardness | 3°dH maximum without a softener |
| Approvals | WaterMark approved, made in Germany |
Features
- VAPOSTOP-ER exhaust air heat recovery keeps vapour in the machine when the hood opens
- Top-mounted single-button control with status indication and three cycles
- Hobart machine hygiene cycle, plus a self-cleaning cycle on drain-out
- Rinse pump for consistent 2.2 litre final rinse volume and pressure
- Wide-angle fan nozzles on the wash and rinse arms
- Wash tank strainer and wash pump inlet strainer
- Straight-through or corner operation
Shipping & Pricing
All prices stated on our site are exclusive of GST.
While we endeavour to keep our prices up to date at all times, due to the nature of the industry our online pricing may be out of date. For the most up-to-date information please contact us to confirm.
Shipping on all products unless otherwise stated does not include shipping.
East Coast Shipping is based on the following suburbs and postcodes:
| Canberra CBD | 2600 – 2601,2610 |
| Canberra | 2600 – 2609 |
| Rest of ACT | 2610 – 2620 |
| Sydney CBD | 1100 – 1299, 2000 – 2001, 2007, 2009 |
| Sydney Metro | 2000 – 2234 |
| Riverina Area | 2640 – 2660 |
| Wollongong | 2500 – 2534 |
| Newcastle | 2265 – 2333 |
| Northern Rivers | 2413 – 2484, 2460 – 2465, 2450 |
| Melbourne CBD | 3000 – 3006, 3205, 8000 – 8399 |
| Melbourne Metro | 3000 – 3207 |
| Brisbane CBD | 4000 – 4001, 4003, 9000 – 9015 |
| Brisbane Metro | 4000 – 4207, 4300 – 4305, 4500 – 4519 |
| Gold Coast | 4208 – 4287 |
| Sunshine Coast | 4550 – 4575 |







